ADN-63-70-A-P-A

Rate:

0.0000/5

( 0 reviews )

Item NO.: V008727 MOQ: 0

Weight: 1kgs

Package Size:

Price：

$88.00

Qty：

$88.00

Shipping：

Calculate Shipping Cost

ZLL

ADN-63-70-A-P-A

delivery time:5-6weeks

Stroke1 mm ... 400 mm
Piston diameter63 mm
Based on normISO 21287
CushioningElastic cushioning rings/pads at both ends Self-adjusting pneumatic end-position cushioning
Mounting positionAny
Structural designPiston Piston rod Profile barrel
Position sensingFor proximity sensor
VariantsEX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended external thread piston rod Special thread on piston rod Extended piston rod With anti-twist protection High corrosion protection Dust protection Reinforced piston rod Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end
Operating pressure0.06 MPa ... 1 MPa
Operating pressure0.6 bar ... 10 bar
Mode of operationDouble-acting
CE marking (see declaration of conformity)as per EU explosion protection directive (ATEX)
UKCA marking (see declaration of conformity)acc. to UK EX instructions
Explosion prevention and protectionZone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
ATEX category gasII 2G
ATEX category for dustII 2D
Type of ignition protection for gasEx h IIC T4 Gb
Type of (ignition) protection for dustEx h IIIC T120°C Db
Explosive ambient temperature-20°C <= Ta <= +60°C
Operating mediumCompressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot mediaOperation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC)0 - No corrosion stress 2 - Moderate corrosion stress 3 - High corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L VDMA24364 zone III
Suitability for the production of Li-ion batteriesMetals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
Cleanroom classClass 4 according to ISO 14644-1 Class 5 according to ISO 14644-1
Ambient temperature-40 °C ... 120 °C